Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What Components to Remove to Replace the Timing Belt on a Mercedes A-Class?

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Timing belt

See other generations:
Video tutorial

Start the procedure for replacing the timing belt on the Mercedes A-Class by opening the hood and removing the air filter housing and the ECU. These steps, along with removing the windshield washer fluid reservoir, are important to increase your workspace.

Once the bulky components on top are removed, proceed to take off the front bumper and the wheels with the fenders.

You also need to remove the radiator, underbody shield, and cooling hoses. Before proceeding to remove the belt, it is essential to take off the steering shaft.


Updated on 6 October 2026 by ScegliAuto


Related tutorials

Replacing the Timing Belt on a Mercedes A-Class
Replacing the Timing Belt on a Mercedes A-Class
Mercedes Classe A (2018-2026 / W177) .. and replace the timing belt on a Mercedes A-Class. First, lift the vehicle and start by removing the front right wheel; then remove the crankshaft.. …
Guide to Replacing the Timing Belt on the Mercedes A-Class
Guide to Replacing the Timing Belt on the Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. and replace the timing belt on the Mercedes A-Class with a Renault engine. First, open the hood of your car and begin to remove the timing belt cover;.. …
Guide to Replacing the Timing Belt on the Mercedes A-Class
Guide to Replacing the Timing Belt on the Mercedes A-Class
Mercedes Classe A (2018-2026 / W177) .. and replacing the timing belt on the Mercedes A-Class. First, open the hood of the vehicle and start by removing the engine mount. Then, raise the vehicle.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Where is the cigarette lighter fuse on the Ford Fiesta?

The fuse for the cigarette lighter socket on the 2010 Ford Fiesta is located inside the fuse box within the vehicle. Specifically, the fuse is found in the driver’s side glove compartment. To check the fuse after confirming that the socket is not working, you need to remove the entire compartment. The relevant fuse is numbered 6 and rated at 20 watts. Once you have removed the damaged fuse, insert a new one to restore proper function to the socket. If the problem persists, it indicates an issue with the control unit, in which case you will need to visit a garage for a diagnostic check.

Watch the video!


by ScegliAuto

More videos