Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Coolant Level in a Mercedes A-Class?

Model: Mercedes Classe A W169 - Years 2004-2012
Part: Radiator

To check the coolant level in the reservoir of the Mercedes A-Class, lift the hood to access the engine compartment. The reservoir containing the coolant is located on the left side, under the windshield washer reservoir and next to the engine. To check the coolant level, open the designated cap. Once the cap is removed, you can top off the coolant by pouring it in until the reservoir is full. After topping off, close the reservoir with the cap and lower the hood.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Top Off the Coolant in a Mercedes A-Class?
Mercedes Classe A (2018-2026 / W177) .. topping off the coolant in a Mercedes A-Class is an extremely simple and quick operation. Before proceeding, wait for the engine to cool completely.. …
How to Check the Oil Level on a Mercedes A-Class
How to Check the Oil Level on a Mercedes A-Class
Mercedes Classe A (2018-2026 / W177) .. see how to check the oil level on a Mercedes A-Class W176/W177, both with gasoline and diesel engines. This is the specific procedure for models with.. …
How to Replace the Thermostat on a Mercedes A-Class
How to Replace the Thermostat on a Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. replacing the coolant thermostat on a Mercedes A-Class. Raise the hood (where the engine is located); remove the engine soundproofing panel to access.. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos