Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to clean the EGR valve of the 2010 Mercedes Vito

Model: Mercedes Vito W639, MK 2 - Years 2003-2013
Part: EGR valve

Today we will explain how to clean the EGR valve of the 2010 Mercedes Vito. The steps to be carried out are: - open the front hood of the Mercedes; - disconnect the valve connector; - unscrew the four screws that secure the valve; - rotate the valve counterclockwise and remove it; - clean the valve with degreasers; - insert the valve; - screw in the screws; - connect the connector; - close the engine hood; If the valve is still dirty or damaged, it will be necessary to proceed with the installation of a new EGR valve. To verify that the valve has been installed correctly, start the engine.

Posted on 6 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the EGR valve on the Mercedes Vito?
Mercedes Vito (2003-2013 / W639, MK 2) To replace the EGR valve on the Mercedes Vito, open the bonnet to access the components in the engine bay: on the left side, you will locate the EGR …
Function and position of the MAF sensor in the Mercedes Vito
Function and position of the MAF sensor in the Mercedes Vito
Mercedes Vito (2003-2013 / W639, MK 2) In this video we can see the position of the mass air flow sensor (MAF sensor) on a 2017 Mercedes Vito: this sensor measures the amount of air being …
Problems arising from the loss of the intake manifold of the Mercedes Vito W447
Problems arising from the loss of the intake manifold of the Mercedes Vito W447
Mercedes Vito (2014-2024 / MK 3, W447) As we can see in this video, a leak in the intake manifold of the Mercedes Vito W447 can cause serious problems to the engine, affecting performance …

Other guides you may be interested in

    Frequently Asked Questions

    • Vito 2003-2013 - Where is the EGR valve of the Mercedes Vito w639 located? Read answer

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos