Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to program the Mercedes ML after replacing the battery?

Model: Mercedes Classe M W164 - Years 2005-2011
Part: Battery

In this tutorial, we can see how to program the Mercedes ML after replacing the battery, an extremely simple and necessary operation for every system to function correctly. The programming involves a series of operations to be performed in sequence. We start by going inside the cabin, then we close the doors, turn on the dashboard, activate and deactivate the headlights, and activate and deactivate the air conditioner. We then turn on the radio, use it for a few minutes, turn it off, and open and close the panoramic roof. Finally, we open the driver's window, close it, hold down the button for 3 seconds, start the engine, and turn the steering wheel completely in both directions. To complete the procedure, simply drive the vehicle for a few kilometers.

Posted on 11 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is and how to reach the fuse box of a Mercedes Benz ML?
Where is and how to reach the fuse box of a Mercedes Benz ML?
Mercedes Classe M (2011-2018 / W166) The fuse box of the Mercedes-Benz ML is located in the engine compartment, on the right side. To access it, first make sure the engine is off and the…
How to adjust the time in the Mercedes M-Class?
How to adjust the time in the Mercedes M-Class?
Mercedes Classe M (2005-2011 / W164) In this tutorial, we can see how to adjust the time in the Mercedes M-Class, an extremely simple and quick operation to be carried out, for example, …
How to Set the Time on a Mercedes M-Class?
How to Set the Time on a Mercedes M-Class?
Mercedes Classe M (2005-2011 / W164) In this tutorial, you will learn how to set the time on a Mercedes M-Class, a very simple and quick operation to perform, for example, after disconne…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos