Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Tail Light Bulb on the Mercedes GLC

Model: Mercedes Glc C253, X253, MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Tail light bulb

See other generations:
Video tutorial

To replace the rear tail light bulb on the Mercedes GLC, open the trunk and use a flathead screwdriver to remove the side panel located near the light. Once the panel is removed, you will have access to the bulb housing.

Disconnect the connector and remove the bulb. Insert the new bulb and reconnect the connector.

Start the vehicle to ensure the lights work before closing the access cover and the trunk. If the bulb issue persists, it may be necessary to replace the related fuse.


Updated on 14 October 2026 by ScegliAuto


Related tutorials

How to replace the rear lights of the Mercedes GLC
How to replace the rear lights of the Mercedes GLC
Mercedes Glc (2015-2022 / C253, X253, MK 1) In this guide we will see the instructions that will allow us to disassemble and replace the rear lights and its bulbs of the Mercedes GLC. First, op…
Where is the Auxiliary Battery Located on a Mercedes GLC?
Where is the Auxiliary Battery Located on a Mercedes GLC?
Mercedes Glc (2015-2022 / C253, X253, MK 1) The auxiliary battery on a Mercedes GLC is located inside the cabin. To access it, fold down the rear seatbacks to expose the screws securing the cus…
How do you replace the battery of the Mercedes GLC remote control?
How do you replace the battery of the Mercedes GLC remote control?
Mercedes Glc (2015-2022 / C253, X253, MK 1) To replace the battery of the Mercedes GLC remote control, you need to pry open the back of the device so that you can detach the corresponding cover…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos