Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Mercedes-Benz C-Class

Model: Mercedes Classe C W206 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

After performing the routine maintenance service, you need to reset the service light; let's see how to do it on the Mercedes-Benz C-Class. First, get inside the vehicle and turn on the ignition; then use the steering wheel controls and press the home button for five seconds, followed by holding the OK button for three seconds.

Once you enter the service menu, you can proceed to reset it, confirming the reset of the warning on the instrument cluster, as shown in the video. Exit the settings menu and start the engine!


Updated on 15 October 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2014-2021 / W205) .. the routine maintenance oil change on a Mercedes-Benz C-Class. First, get inside the vehicle and turn on the ignition; then press the buttons on the steering.. …
Mercedes Classe C (2007-2013 / W204) .. reset the "Service" light on your Mercedes-Benz C-Class. Start by turning on the vehicle and checking that the "Service" indicator is visible on.. …
Mercedes Classe C (2014-2021 / W205) .. regular maintenance oil change on a Mercedes C-Class. First, get in the vehicle and turn on the ignition; then go to the onboard computer menu and select.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos