Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tire Pressure Light on an MG ZS

Model: MG ZS Zs11 - Years 2017-2024
Part:

Unfortunately, resetting the tire pressure light cannot be done through the dashboard as shown in this video of an MG ZS EV. You need to access the settings using the menu button on the steering wheel until you find the icon indicating the pressure of all four tires. Once you check the pressure, you can usually find a technical sheet on the inner edge of the door explaining all the pressures for various conditions the vehicle may encounter. Check the pressure of the tires you are interested in and inflate them until you reach the indicated pressure. After completing all the steps, when you start the vehicle, you will notice that the warning light has disappeared.

Posted on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tire Light on the MG ZS
How to Reset the Tire Light on the MG ZS
MG ZS (2017-2024 / Zs11) In this mini guide, we will help you correctly complete the manual reset of the tire light (also known as the TPMS light) on your first-generation MG…
How to Reset the Service Light in the MG ZST?
How to Reset the Service Light in the MG ZST?
MG ZS (2024-2026 / MK 2) In this tutorial, we will see how to reset the service light in the MG ZST, a very simple and quick operation to perform only after completing all sc…
How to Reset the Service in the MG ZST?
How to Reset the Service in the MG ZST?
MG ZS (2017-2024 / Zs11) In this tutorial, see how to reset the service in the MG ZST, a very simple and quick operation to perform only after completing all required mainten…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos