Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. MG
  4. :
  5. Hector
  6. : How do you remove the front bumper of the MG Hector?

MG Hector - Video tutorial

Model: MG Hector MK 1 - Years 2019-2024
Part: Front bumper
Operation: How do you remove the front bumper of the MG Hector?

In order to remove the front bumper of the MG Hector you have to go to open the hood, so that you have access to the screws and rivets that secure the bumper from its upper part. Once all these fasteners have been loosened, it will be possible to detach the moldings that are located along the outside of the front wheel arches: under these moldings you will be able to find additional screws that secure the bumper. By unscrewing them it will be possible to detach the bumper and disconnect the connectors inside; once the old bumper has been removed, it will be possible to insert the new one, fixing it appropriately.


Posted on 19 May 2024 by ScegliAuto

This video is currently unavailable

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos