Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Front Brake Rotors and Pads on the MG Hector

Model: MG Hector MK 1 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Brake rotors

Video tutorial

In this brief and simple guide, follow the instructions to remove and replace the front brake rotors and pads on the MG Hector. First, lift the vehicle and remove the front wheel; then, use a tool to push the piston back in by loosening the bolts securing the brake caliper to remove it from the rotor, as shown in the video.

Next, remove the bolts from the rotor bracket, take out the old rotor, and replace it with the new one. Install the new pads and reassemble everything by following the reverse procedure!


Updated on 9 July 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery on the MG Hector
How to Replace the Remote Battery on the MG Hector
MG Hector (2019-2026 / MK 1) Replacing the battery in the MG Hector remote is a very simple and quick operation; this tutorial will show you how to proceed. For this, you will ne…
How to Replace the Remote Battery for the MG Hector?
How to Replace the Remote Battery for the MG Hector?
MG Hector (2019-2026 / MK 1) As we can see in this tutorial, replacing the remote battery for the MG Hector is a very simple and quick operation. For this, you will need a replac…
How to Replace the Cabin Air Filter on the MG Hector
How to Replace the Cabin Air Filter on the MG Hector
MG Hector (2019-2026 / MK 1) If you want to learn how to replace the cabin air filter in your MG Hector, follow these steps. This procedure is very similar to what you've seen in…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos