Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Factory Radio with an Android Unit in the MG ZS

Model: MG ZS Zs11 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Car stereo

See other generations:
Video tutorial

Let's briefly go through the steps to remove and replace the factory radio with a new Android multimedia system in the MG ZS. First, get inside the vehicle and start removing the original radio; to do this, remove the side plastic cover and unscrew the mounting screws located on the sides of the radio, as shown in the video.

At this point, disconnect the electrical connectors found at the back; then, install the new Android radio, making the necessary modifications to the wiring, following the video tutorial until the end!


Updated on 12 June 2026 by ScegliAuto


Related tutorials

MG ZS (2017-2024 / Zs11) In this guide, we will see how to remove and replace the factory radio with an Android type in the MG ZS, in simple and quick steps. First, get insid…
MG ZS (2017-2024 / Zs11) Today, we will see in this video tutorial how to remove and replace the radio in an MG ZS, following the instructions below. First, get inside the ve…
MG ZS (2017-2024 / Zs11) To replace the stereo in the MG ZS, remove the air vent located on the right side of the dashboard. This will allow you to detach the trim that runs …

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos