Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. ZS
    4. : How to replace the factory radio of the MG ZS.

MG ZS - Video tutorial

Model: MG ZS Zs11 - Years 2017-2024
Part: Car stereo
Operation: How to replace the factory radio of the MG ZS.

Let's see in this guide how to remove and replace the standard car radio with an Android type radio for the MG ZS, in simple and quick steps. First, we get into the car and start removing the ventilation grilles located on the top of the dashboard. Then, we remove the side plastics of the radio by unscrewing the fixing screws located on the sides to remove it, as shown in the video. At this point, we disconnect the electrical connectors found on the back and install the new Android radio, following the video tutorial until the end!


Posted on 29 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos