Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. ZS
    4. : How to disassemble the car stereo of the Mg Zs

MG ZS - Video tutorial

Model: MG ZS Zs11 - Years 2017-2024
Part: Car stereo
Operation: How to disassemble the car stereo of the Mg Zs

Today we will see, in this video tutorial, how to disassemble and replace the car stereo of the Mg Zs, following the instructions below. First of all we get on board the car and begin to disassemble the central cover of the instrumentation, leveraging the sides with something thin; after which we remove the plastic cover of the car radio and the air vents, as shown in the video. At this point we unscrew the fixing screws of the radio, which we find on the sides, to remove it, disconnecting the electrical connectors on the back; we apply the opposite procedure for reassembly!


Posted on 20 May 2024 by ScegliAuto



Replacement of the stock car radio with an Android one on the MG ZS
MG ZS (2017-2024 / Zs11) Let's briefly discover the steps that will allow us to disassemble and replace the stock car stereo with a new multimedia system of the Android type
How to remove the driver's airbag from the MG ZS.
MG ZS (2017-2024 / Zs11) In this short and simple guide, we will see the main instructions that will allow us to disassemble and replace the driver's airbag of the MG ZS. Fir
How to replace the rear wheel bearing of the MG ZS
MG ZS (2017-2024 / Zs11) Let's see in this short and simple guide how to disassemble and replace the rear wheel bearing of the MG ZS, following the instructions below. First

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos