Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on the MG TF

Model: MG MG Various
Part: Timing belt

Video tutorial

Lift your vehicle on axle stands, then remove the left wheel to gain easier access to the area where you will be working. Now, unclip and open the bonnet to reach the relevant area.

The belt is located right next to the engine, which is why removing the wheel was helpful, as it allows you to work more comfortably during both the extraction and installation of the new belt. Once the belt is fitted, perform a few tests by starting the engine, and for reassembly, simply follow the steps in reverse.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

How to replace the headlight bulb of the MG 6.
How to replace the headlight bulb of the MG 6.
MG MG Various In this brief guide, we will see the steps that will allow us to disassemble and replace the low beam bulb of the front headlight of the MG 6. First,…
How to Replace the Cabin Fan Resistor on the MG TF
How to Replace the Cabin Fan Resistor on the MG TF
MG MG Various In this brief and simple guide, you will find instructions on how to remove and replace the cabin fan resistor on the MG TF. First, get inside the ve…
How to Replace the Dipped Beam Bulbs in the MG ZR?
How to Replace the Dipped Beam Bulbs in the MG ZR?
MG MG Various As shown in this tutorial, replacing the front headlamp bulbs in the MG ZR is a very simple task. Before proceeding, ensure the key is not in the ign…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos