Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Timing Chain on the MG 3

Model: MG 3 MK 1 - Years: 2008, 2009, 2010, 2011
Part: Timing belt

See other generations:
Video tutorial

Below are the main instructions for removing and replacing the timing chain on the MG 3. First, open the hood and remove the upper plastic cover; then disconnect the upper electrical harnesses and remove the spark plugs using a socket wrench with an extension, as shown in the video.

At this point, remove the cylinder head cover by unscrewing all the bolts to access the timing; remove the front engine mount and take the necessary references for replacing the timing chain, following the video to the end!


Updated on 20 May 2026 by ScegliAuto


Related tutorials

MG 3 (2011-2024 / MK 2) To replace the rear headlight bulb on the MG 3, open the trunk of the car to access the two screws next to it. Once the screws next to the gasket are…
MG 3 (2011-2024 / MK 2) To replace the radiator on a MG 3, first remove the front bumper of the car. Open the hood and loosen the screws that secure the bumper from the top …
MG 3 (2024-2026 / MK 3) The courtesy lights pre-installed by the manufacturer on the MG 3 provide a warm light that is not particularly functional. If desired, you can repla…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos