Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Radiator on a MG 3?

Model: MG 3 MK 2 - Years 2011-2024
Part: Radiator

To replace the radiator on a MG 3, first remove the front bumper of the car. Open the hood and loosen the screws that secure the bumper from the top and bottom. Once the bumper is completely detached, unscrew the screws that hold the radiator in its housing, disconnecting any other tubes and connectors as well. This way, the old radiator can be completely removed and replaced with a new one. After the replacement, reinstall the bumper.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

MG 3 (2011-2024 / MK 2) To properly replace the key battery of your MG 3 Mk2, it only takes a few seconds. Just follow the instructions in this mini guide. The first thing t…
MG 3 (2011-2024 / MK 2) In this video tutorial, you will learn how to disassemble and replace the engine air filter of the MG 3, following the instructions below. First, ope…
MG 3 (2008-2011 / MK 1) Below are the main instructions for removing and replacing the timing chain on the MG 3. First, open the hood and remove the upper plastic cover; the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos