Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to top up the coolant in the Mini Cooper?

Model: Mini Mini R55, R57, R56 - Years 2007-2014
Part: Antifreeze coolant

In this tutorial we can see how to top up the coolant in the Mini Cooper, an extremely simple and quick operation. First of all, we buy a container of coolant at any auto parts store, then make sure the engine is completely cool and open the hood. Next, locate the expansion tank located behind the left headlight, unscrew the cap and, using a funnel, pour in the necessary amount of coolant to reach the ideal level, which is indicated on the tank itself. Finally, tighten the cap and start the vehicle.

Posted on 21 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to check and refill the coolant in the Mini Cooper?
How to check and refill the coolant in the Mini Cooper?
Mini (2001-2007 / R53, R50, R52) In this video, we can see how to check and top up the coolant in the Mini Cooper, a very simple and quick operation that should be done periodically.…
How to check and top up the coolant in the Mini Cooper?
How to check and top up the coolant in the Mini Cooper?
Mini (2014-2023 / F55, F56, F57, F54) In this tutorial we can see how to check and top up the coolant in the Mini Cooper, a very simple and quick operation to be carried out periodically.…
How to top up the coolant on the Mini Cooper R50
How to top up the coolant on the Mini Cooper R50
Mini (2001-2007 / R53, R50, R52) In today's video we will see how to add or top up coolant or antifreeze on the Mini Cooper R50, but on later models. First we open the engine hood an…

Other guides you may be interested in

How to Change the Diesel Filter on a Renault Captur 1.5 dCi

The diesel filter on the Renault Captur is always of the immersion type, but instead of being located at the top of the engine bay, it is positioned lower, inside the front right wheel arch (passenger side), practically under the headlamp. To replace it, it is advisable to lift the vehicle, remove the front right wheel and the corresponding inner lining to access the filter location. Unscrew the fastening nuts of the support clamp to extract it from its housing and disconnect the connector and pipes. At this point, unscrew the fixing screws of the cap, remove the old filter and insert the new one, also replacing the O-ring seals, and then reverse the steps for installation. Before starting the engine, turn the ignition on and off several times to allow the filter to fill.

Watch the video!


by ScegliAuto

More videos