Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the brake fluid level on a Mini

Model: Mini Mini F60, Countryman2 - Years 2017-2023
Part: Warning light – error code

In this video, we will see how to reset the brake fluid warning light on a Mini car: turn on the instrument panel, and press the button located on the bottom right side of the speedometer for about ten seconds. Maintenance messages will appear on the display in order of priority (for example: engine oil, brake fluid, brake pads, etc). Select the "brake fluid" message using the button on the left lever of the turn signal, then hold down the button on the left lever until the message "reset?" appears. Release and press again to confirm. Wait for the message "reset successful" to appear, turn off the instrument panel, and turn it back on to verify that the warning light has turned off.

Posted on 22 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Why does the brake fluid level decrease?
Why does the brake fluid level decrease?
Mini (2007-2014 / R57, R55, R56) In this video, we see why the brake fluid level drops: excluding any system failures, for which you should immediately go to a mechanic, there is a t…
How to keep track of the maintenance status of our Mini
How to keep track of the maintenance status of our Mini
Mini (2023-2026 / F66) Let's see how to monitor the maintenance status of our Mini from the on-board computer: from the multimedia screen we select "vehicle info" and then …
Check the brake fluid level and reset the warning light on the dashboard on a Mini Clubman.
Check the brake fluid level and reset the warning light on the dashboard on a Mini Clubman.
Mini (2014-2023 / F57, F54, F56, F55) In this video we can see how to check the brake fluid and reset the instrumentation on a Mini Clubman: in fact, once the car is started we have an ac…

Other guides you may be interested in

How to Remove the Spark Plugs from a Toyota Aygo

How to remove the spark plugs from a Toyota Aygo? In this video, we detail the procedure: Pull the engine bay release lever located at the bottom left of the dashboard and lift the front bonnet, securing it. Remove the engine soundproofing panel, then use a socket spanner to unscrew the securing pins of the coils. Grasp the coil and twist it to extract it from the cylinder head. Use a socket spanner and extension to unscrew the spark plugs (remove them from the cylinder head) and take the new spark plug, inserting it into the cylinder head with the socket spanner. Finally, reattach the plastic cover panel.

Watch the video!


by ScegliAuto

More videos