Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet on a Mini

Model: Mini Mini R57, R56, R55 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Body

See other generations:
Video tutorial

To open the bonnet on a Mini: Pull the plastic lever located at the bottom left of the dashboard, then lift the bonnet slightly and pull the release lever to the left. Once the engine bonnet is unlocked: lift it upwards and secure it with the prop rod. Now that the engine bonnet is open, you can perform necessary maintenance on the reservoirs and engine.

To close the bonnet: remove the prop rod and let the bonnet drop from a minimal height. Ensure it is properly closed.


Updated on 5 March 2026 by ScegliAuto


Related tutorials

How to Open the Bonnet of a Mini Cooper
How to Open the Bonnet of a Mini Cooper
Mini (2014-2023 / F55, F54, F56, F57) If you have just purchased a new Mini Cooper and are not familiar with it, one of the questions you may have is: "How do you open the bonnet?" It’s n…
How to Open the Bonnet of the Mini One
How to Open the Bonnet of the Mini One
Mini (2001-2007 / R53, R50, R52) To open the bonnet of the Mini One, do not look in the lower left part of the steering wheel. Instead, operate from the passenger side, where on the …
How to Open the Bonnet of the Mini Cooper
How to Open the Bonnet of the Mini Cooper
Mini (2017-2023 / Countryman2, F60) In this short and simple guide, you will learn how to open the bonnet of the Mini Cooper, following the instructions below. First, open the front doo…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos