|
Do it yourself
| |||
| ||||
How to replace the battery of the Mini Cooper F66 remote control
If you want to replace the small battery inside the remote control of your new Mini Cooper F66 by yourself, just follow the steps described in the following guide. Before starting, make sure you have a new CR2032 battery, which is the only compatible battery for the car remote. Then, remove the back cover of the remote control and locate the battery holder. Remove the physical emergency key for convenience and replace the old battery with the new one. Finally, insert the emergency key again and reassemble the protective cover.
Posted on 15 November 2025 by ScegliAuto
Video tutorial
Related tutorials
Mini
(2007-2014 /
R55, R57, R56)
The procedure for replacing the battery of the Mini Cooper remote control is done by levering with an object on the back of the device, so that the a…
Mini
(2007-2014 /
R55, R57, R56)
To replace the battery of the Mini Cooper remote control, you will need to use an object that can act as a lever to separate the two halves of the re…
Mini
(2007-2014 /
R55, R57, R56)
In a few simple steps, we will see how to disassemble and replace the battery of the Mini Cooper key remote. First, take the remote in your hand and …
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.112
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
