Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Thermostat on the Mini Cooper 1.6

Model: Mini Mini R53, R50, R52 - Years 2001-2007
Part: Thermostat

Here are the useful instructions for removing and replacing the thermostat on the Mini Cooper 1.6. First, open the vehicle's engine bonnet and begin by removing the battery, disconnecting both terminals (positive and negative); then remove the battery tray as shown in the video. At this point, disconnect the coolant hose and the thermostat, draining the fluid into a container; then unscrew the thermostat screws to remove it and replace it with the new one, finally topping up with new coolant!

Posted on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the thermostat of the Mini Cooper S
How to replace the thermostat of the Mini Cooper S
Mini (2007-2014 / R55, R57, R56) Let's see in this guide the instructions on how to disassemble and replace the thermostat of the Mini Cooper S. First, we open the hood of our car an…
How to replace the thermostat bulb on the Mini Cooper R56
How to replace the thermostat bulb on the Mini Cooper R56
Mini (2014-2023 / F55, F56, F57, F54) In this video tutorial we will see the main instructions for disassembling and replacing the thermostat on the Mini Cooper R56, from 2013. First we l…
How to change the thermostat of the Mini Cooper 1.6
How to change the thermostat of the Mini Cooper 1.6
Mini (2001-2007 / R53, R50, R52) We see in this guide the instructions necessary to remove and replace the thermostat of the Mini Cooper, with 1.6 petrol engine. First we open the en…

Other guides you may be interested in

How to Change the Solenoid Bleed Valve on a Mazda-6

Open the bonnet and secure it. Use pliers to remove the metal clamps from the hoses in the engine bay, then remove the valve from both ends and disconnect the power connector by hand. After comparing the damaged valve with the new one, fit it onto the hoses in the engine bay, securely tighten it with the metal clamps, and reconnect the connector. Test the car to ensure it is functioning correctly.

Watch the video!


by ScegliAuto

More videos