Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the spark plugs of a Mini One 1.4

Model: Mini Mini R60, Countryman1 - Years 2010-2016
Part: Spark plugs

Before we can start, we will have to go and open the front hood of our Mini One 1.4. So let's start by disengaging and removing the top engine cover. After that, we will have to move the sleeve connected to the air filter block, and then move the cover of the high pressure pump. By doing so, we will have reached the coils connected to the spark plugs. We then proceed by disconnecting the relative electrical connectors, and then disassembling the coils themselves, unscrewing the relative fixing screws. At this point, we will have to unscrew and remove the spark plugs themselves, and we will have finished the disassembly. To fit the new spark plugs, we will have to follow these instructions in reverse, and we will have completed the replacement.

Posted on 10 May 2021 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Engine Spark Plugs
Replacement of Engine Spark Plugs
Mini (2001-2007 / R53, R50, R52) Disconnect the coil leads; the first spark plug is located at the bottom of the well. Pull upwards on the connection boot. To avoid confusion, only d…
Mini Cooper spark plugs replacement
Mini (2010-2016 / R60, Countryman1) In today's video tutorial we will see how to remove and replace the spark plugs of the engine of a Mini Cooper. First we open the bonnet of our car a…
How to replace the ignition coil of the Mini R50
How to replace the ignition coil of the Mini R50
Mini (2001-2007 / R53, R50, R52) The guide shows how to disassemble the ignition coil of the Mini R50. The first step is to open the bonnet; locate the spark plugs, disconnect the ca…

Other guides you may be interested in

How to Replace the Front Headlamp on a Fiat Bravo

First, release the bonnet using the lever, then lift it. To remove the headlamp, you will need to dismantle a significant part of the front bumper. Start by removing the inner wheel arch liner to access the screw that secures the bumper to the wing. Next, remove the screws located on the top of the bumper. This will allow you to unscrew all the bolts securing the headlamp, including the one hidden by the bumper. Finally, disconnect the connector at the back of the headlamp and carry out the necessary replacements.

Watch the video!


by ScegliAuto

More videos