Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light in the Mini Cooper?

Model: Mini Mini F57, F56, F55, F54 - Years 2014-2023
Part: Service warning light

Resetting the service warning light in the Mini Cooper is very simple, let's see how to proceed in this tutorial. Obviously, this operation should only be carried out after carrying out the scheduled maintenance work. First we turn on the instrument panel and hold down the right button on the tachometer until the maintenance menu appears. At this point, press the "BC" button located at the far end of the left lever to scroll to the maintenance item we intend to reset and keep it pressed to start the procedure. Finally, we turn the panel off and on again to check that everything has gone well.

Posted on 30 December 2021 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Mini Cooper
How to reset the service light on the Mini Cooper
Mini (2007-2014 / R56, R57, R55) In a few simple steps, we will reset the maintenance light for the engine oil change of the Mini Cooper. First, get into the car and turn on the dash…
How to reset the service light on the Mini Cooper
How to reset the service light on the Mini Cooper
Mini (2010-2016 / Countryman1, R60) The service light reset on a Mini Cooper F60 model vehicle follows simple and quick steps to be performed independently. To reset the light, we must …
How to reset the service light on a Mini Cooper
How to reset the service light on a Mini Cooper
Mini (2014-2023 / F57, F56, F55, F54) Today we will explain how to reset the service light on a Mini Cooper vehicle. To reset the light, we need to turn on the instrument panel and press …

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos