Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil warning light on the Mini Cooper

Model: Mini Mini R60, Countryman1 - Years 2010-2016
Part: Service warning light

If the oil warning light on your Mini Cooper continues to come on even though you have already changed the fluid and filter, you simply need to perform a reset. First, turn on the ignition and use the button located at the end of the left steering wheel lever to navigate the menu. Once the "Set / Info" item is displayed, hold down the right button under the rev counter for a few seconds. Scroll until you find the oil icon and immediately afterwards hold down the button located at the end of the left lever. As soon as the reset is confirmed on the display, release the button and you are done.

Posted on 12 February 2022 by ScegliAuto

Video tutorial

Related tutorials

Reset the Mini Cooper service warning light
Reset the Mini Cooper service warning light
Mini (2007-2014 / R55, R57, R56) Today we will see the procedure for resetting the Mini Cooper oil change routine maintenance service light. First of all we get on board the car and …
Reset tire pressure warning light Mini Cooper R50 - R53
Reset tire pressure warning light Mini Cooper R50 - R53
Mini (2007-2014 / R55, R57, R56) In today's video we will see the instructions that will allow us to reset the tire pressure warning light of a Mini Cooper R50-R53; before carrying o…
Brake warning light reset on Mini Cooper
Brake warning light reset on Mini Cooper
Mini (2010-2016 / R60, Countryman1) Resetting the brake warning light on Mini Cooper is extremely simple, as well as resetting any other warning light that may appear on the panel (for …

Other guides you may be interested in

Replacing H7 Bulb in an Opel Meriva

Are the front headlight bulbs of your Opel Meriva out? Let's see how to proceed with the removal in this tutorial video. Open the bonnet and secure it, then remove the inspection caps from the headlights (at the back of the headlights) using a screwdriver or pliers. Disconnect the bulb holders from the headlight and disconnect the relevant power connectors. Replace the damaged bulbs with new ones (same size and voltage). After replacing the bulbs, refit the bulb holder into the headlight housing. Finally, close the back of the headlights with the inspection caps. Test the correct functioning of the lights by turning on the ignition.

Watch the video!


by ScegliAuto

More videos