Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fog light bulb on the Mini Cooper

Model: Mini Mini R60, Countryman1 - Years 2010-2016
Part: Fog lights

Intervening with a timely replacement of the fog lights is very important as it reduces any inconvenience and dangers when driving on days with a lot of fog. Below we will find out together how to replace the fog light bulb in the 2015 Mini Cooper. First of all it must be remembered that the entire procedure must be performed with the engine off and with the car parked safely. Then go in front of the wheel cover on the side where the fog light to be replaced is present and remove the plastic cap present. At this point, unscrew the old bulb and replace it with the new one. Finally, replace the plastic cap correctly.

Posted on 24 February 2022 by ScegliAuto

Video tutorial

Related tutorials

Replacing the arrow bulb on a Mini Cooper
Replacing the arrow bulb on a Mini Cooper
Mini (2001-2007 / R52, R50, R53) Replacing the indicator light bulb of a Mini Cooper. We remove the spotlight from inside the side fender. We remove the spotlight of the license plat…
How to Change the Battery of the Mini Cooper Remote
How to Change the Battery of the Mini Cooper Remote
Mini (2007-2014 / R57, R55, R56) Replacing the battery of the Mini Cooper key/remote is a straightforward task. Take a small screwdriver and use it as a lever to open the small cover…
How to reset the 2007 Mini Cooper service
How to reset the 2007 Mini Cooper service
Mini (2007-2014 / R57, R55, R56) To reset the oil change service of the 2007 Mini Cooper we operate like this: we start by holding down the button with the clock symbol (located on t…

Other guides you may be interested in

How to Remove the Rear Wiper Blade on a Citroen C3

This guide shows you how to remove and replace the rear wiper blade on a Citroen C3. Grasp the rear wiper blade with your hands, gently pull the rubber from the moving blade (without breaking it), and slide it off the arm on the left. Fit the new wiper rubber onto the arm (if the rubber is original, you may need to adjust the length by cutting it as shown). Finally, lower the wiper arm onto the rear window and test the new blade by activating the rear wiper. It is always preferable to use original parts for better durability and quality.

Watch the video!


by ScegliAuto

More videos