Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Changing the Oil Filter

Model: Mini Mini R52, R50, R53 - Years 2001-2007
Part: Oil filter

The following guide shows how to change the oil filter. It is a fairly simple operation that can also be done alone. The oil filter is a component that should be replaced regularly to ensure the proper functioning of your car. For optimal draining of the tank, the car should always be kept level. Start by unscrewing the oil cap and draining the tank completely. The oil filter is identifiable as it is a cylinder protruding from the lower part of the engine. A chain wrench is essential to unscrew it. Once unscrewed, it can be removed and replaced with a new one.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Oil on a Mini Cooper S R56
How to Change the Oil on a Mini Cooper S R56
Mini (2007-2014 / R56, R57, R55) To perform the oil change on a Mini Cooper S R56, first lift the front of the car, open the oil filler cap (to facilitate draining), then place a lar…
Replace Oil and Filter on a Mini
Replace Oil and Filter on a Mini
Mini (2007-2014 / R56, R57, R55) Remove the engine oil filter on a Mini. Follow this guide to proceed with the replacement: open the car's door and pull up the engine compartment rel…
How to Replace Oil and Filter on a Mini
How to Replace Oil and Filter on a Mini
Mini (2007-2014 / R56, R57, R55) How to replace the engine oil and filter on a Mini? Follow this guide to proceed with the replacement. Open the car door and pull up the engine compa…

Other guides you may be interested in

How to Remove the Front Bumper of a Subaru Impreza

Do you want to replace the front bumper of a Subaru Impreza? Follow this guide. Lift the bonnet and secure it. Using a socket wrench, unscrew the fastening bolts of the bumper located at the top as shown in the video. Once this is done, unscrew the screws of the splash guard located near the wheels, and finally remove the plastic pins/rivets at the bottom of the bumper. Remove the bumper from the vehicle body by hand. To proceed with the installation, position the bumper as shown in the video and tighten all screws around the splash guard and the perimeter.

Watch the video!


by ScegliAuto

More videos