Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the brake change light in the Mini Countryman?

Model: Mini Mini R60, Countryman1 - Years 2010-2016
Part: Warning light – error code

In this video we can see how to reset the brake change light in the Mini Countryman, an operation to be carried out once the pads have been replaced. Let's start by turning on the instrument panel, not the engine, and hold down the "trip" button located on the right side of the tachometer. Once in the maintenance menu, we scroll through the various items using the button at the end of the arrow lever. At this point, we select the front or rear brakes, according to the needs, and we hold the button down once to start the reset procedure, a second time to confirm.

Posted on 17 August 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Mini Countryman R60 brake service light
How to reset the Mini Countryman R60 brake service light
Mini (2010-2016 / R60, Countryman1) In this short video we will see the instructions that will allow us to reset the brake wear service light on the Mini Countryman R60, but also on the…
Resetting the brake pad warning on the Mini Countryman.
Resetting the brake pad warning on the Mini Countryman.
Mini (2017-2023 / Countryman2, F60) This short guide will show us how to reset the brake pad warning on the Mini Countryman, following the instructions below. First, we get into the car…
How do you reset the brake oil warning light on the Mini Countryman?
How do you reset the brake oil warning light on the Mini Countryman?
Mini (2010-2016 / R60, Countryman1) In order to reset the brake oil warning light on the Mini Countryman you need to turn on the instrument panel, moving to the menu that will appear on…

Removing the Door Panel on a BMW Z3

Remove the front left door panel on a BMW Z3. Use a screwdriver to remove the trim around the upper door handle. Take out the switch panel from the door panel (disconnect the connector), unscrew the remaining screws on the door panel, and detach the retaining clips. Finally, pull the panel away by hand and disconnect it from the door (disconnect the power wiring and the opening cable if present on the model). Perform the desired maintenance inside the door. Refit the panel after maintenance.

Watch the video!


by ScegliAuto

More videos