|
Do it yourself
| |||
| ||||
How to Replace the Power Steering Pump on a Mini Cooper
Model: Mini Mini
R53, R52, R50
- Years 2001-2007
A common failure on Minis, especially the Mini Cooper, is the power steering pump. Changing it is not difficult, but you need to find a way to lift the vehicle safely. Do not rely too much on the jack, as it is generally not very reliable; it's better to place one or two wheels underneath for added safety. Once you have identified the pump, disconnect the two connectors and remove the screws that hold it in place. There are two screws at the back that may require some searching. The other two are at the front. Next, remove the metal pipe that contains the power steering fluid. Let it drain into a container, and then dispose of it at an authorised centre. You can find a refurbished pump for just over £100 on major e-commerce platforms; remember that the fluid must be green for this pump. It costs about £20 per litre. After you have removed the pump, simply insert the new one and top up the fluid from the engine bay.
Updated on 24 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Mini
(2001-2007 /
R53, R52, R50)
In this guide we will see the instructions that will allow us to repair the power steering pump of the Mini Cooper. Problems related to the power ste…
Mini
(2001-2007 /
R53, R52, R50)
In order to replace the power steering pump of the Mini Cooper, it will be necessary to lift the car so that it is possible to access the components …
Mini
(2001-2007 /
R53, R52, R50)
This guide shows how to top up the power steering fluid of the Mini Cooper R50. Position the vehicle on a flat surface and secure it. The power steer…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Reset the Central Locking of the Volkswagen Golf 4?
If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.637
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |