|
Do it yourself
| |||
| ||||
How to restore service on the Mini R50
Model: Mini Mini
R52, R50, R53
- Years 2001-2007
In this video, it is shown how to reset the maintenance light and oil change light on the MINI Cooper R50. This procedure is very quick and takes less than 1 minute to complete. To reset the light, first start the dashboard without starting the engine, by inserting the key into its slot and then pressing the start button without pressing the brake or clutch. Then, press the button on the dashboard for a few seconds to access the menu. When the menu appears, use the button on the side of the lever on the left side of the steering wheel to scroll through the various maintenance options until you find the right one. Once you have identified it, hold down the button for a few seconds. The reset will appear on the dashboard, now just wait for the reset to finish while continuing to hold down the button. Once the reset is complete, release the button and restart the dashboard to verify that the procedure has been completed correctly.
Posted on 9 May 2024 by ScegliAuto
Video tutorial
Related tutorials
Mini
(2001-2007 /
R52, R50, R53)
In this video, we see how to reset the power windows on a Mini R50: it may be necessary to do this if for any reason we have disconnected the battery…
Mini
(2001-2007 /
R52, R50, R53)
In this video, we see the instructions that will allow us to reset the oil change routine maintenance service light on a Mini Cooper R50, second seri…
Mini
(2001-2007 /
R52, R50, R53)
The fuses of the Mini R50 are divided into the appropriate fuse boxes: in this model of car there are two. The first is located inside the passenger …
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Remove the Passenger Door Panel on a Volkswagen Polo
How do you remove the passenger door panel on a Volkswagen Polo? This video illustrates how to proceed. Before starting the disassembly work, disconnect the battery terminals located in the front engine bay. Using a lever or screwdriver, pry at the handle on the door panel to detach its covering. Use a screwdriver to undo any screws present on the panel, then use a plastic lever to detach all the clips around the perimeter of the door panel, and pull it away by hand. Now, disconnect the opening lever cable, the window lift terminals, and the speaker terminals. Reassemble everything by retracing your steps. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.159
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |