Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mini
    3. :
  3. Mini
    4. : How to replace a car front bumper.

Mini - Video tutorial

Model: Mini Mini R56, R55, R57 - Years 2007-2014
Part: Front bumper
Operation: How to replace a car front bumper.

First of all you have to remove the hooks on the upper part of the plastic net that is on the bumper, then to unhook the lower part of the net, you have to push down with a screwdriver the hooks from the inside of the net and pull it towards the 'external. Then under the bumper unscrew the two side screws, and extract the three central hooks. Then you have to remove the front part of the wheel arch by extracting the three plastic hooks, then detach the contacts of the light that is on the upper band of the wheel, extract the hooks of the band to have the possibility of unscrewing the side screws and detach the contacts of the fog lights At this point we can unscrew the last two screws that are in the center of the bumper and now we can remove the old bumper and replace it with the new one on your mini.


Posted on 25 September 2023 by ScegliAuto

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos