Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Air Filter Hose from a Mini

Model: Mini Mini R56, R57, R55 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Air filter

Video tutorial

How do you maintain your Mini? This video explains how to remove an air filter hose. Open the car door and pull up the engine bay release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. To remove the hose, you need to take out the left headlamp.

Use a socket wrench to unscrew all the bolts around the headlamp perimeter, then pull the headlamp out with the power connector. Use a pry bar to leverage the air hose out of its guide, removing it from both sides.

Once done, fit the new air filter piece at both ends. If you find any broken plastic clips, follow the video instructions to reform the pin housing.

Refit the headlamp with the bolts and the light connector.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

Mini (2007-2014 / R56, R57, R55) To replace the air filter, proceed as follows: 1) Gently disconnect the cable from the "MAF" sensor. 2) Loosen the metal clamp that connects the rubb…
Mini (2007-2014 / R56, R57, R55) These short and simple instructions will show us how to disassemble and replace the diesel fuel filter of the Mini Cooper 1.6 D. First, we open the c…
Mini (2014-2023 / F56, F54, F57, F55) In this brief and simple guide, you will learn how to remove and replace the engine air filter on a Mini Cooper, following the instructions below. Fi…

Other guides you may be interested in

Location of the Jack and Spare Wheel of the Toyota Yaris

In the unfortunate event that one of the wheels of the Toyota Yaris is punctured, it is useful to know the location of the lifting jack, the spare wheel, the tool to operate the jack, and to unscrew the wheel bolts. The jack is located under the driver's seat, secured to a bracket and protected by a plastic cover, which you can remove by acting on the fixing clips. The spare wheel is located under the floor panel of the boot, secured to the floor by a threaded plastic flange, alongside which you will find the tool, consisting of a bent bar, which is used to operate the jack on one side and to remove the wheel on the other.

Watch the video!


by ScegliAuto

More videos