Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Starter Motor on a Mitsubishi 300 GT

Model: Mitsubishi 3000 Gt MK 1 - Years 1990-2001
Part: Starter motor

Learn how to remove the starter motor on a Mitsubishi 300 GT. Open the car's bonnet and secure it. First, use a socket wrench to disconnect the battery power cables. Lift the car with a jack or a column lift, then unscrew the fastening pins of the starter motor with a socket wrench. Disconnect the starter motor power connectors using pliers or a screwdriver, depending on the pressure of the tabs. Remove the part from its housing and take it out of the engine bay. Finally, install the new starter motor, connecting the power cables and securing it with the necessary screws.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery in the Mitsubishi 3000 GT remote control?
How to replace the battery in the Mitsubishi 3000 GT remote control?
Mitsubishi 3000 Gt (1990-2001 / MK 1) In this tutorial, we will see how to replace the battery of the Mitsubishi 3000 GT remote control, a very simple and quick operation. To do this, we …
How to Replace the Remote Key Battery on the Mitsubishi 3000GT
How to Replace the Remote Key Battery on the Mitsubishi 3000GT
Mitsubishi 3000 Gt (1990-2001 / MK 1) When the battery in the remote key of your vehicle is flat and needs replacing, proceed as follows: take a small screwdriver and insert it into the s…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos