Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the starter motor in the Renault Megane?

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Starter motor

In this tutorial we can see how to disassemble the starter motor in the Renault Megane, a simple operation but still requires good manual skills. First of all, we open the hood, then disconnect both battery terminals and remove it. We then remove the plastic support containing the control unit, disconnect the power terminals of the starter motor and unscrew the three fixing bolts. At this point we can separate the starter motor from the support, position the replacement and reassemble everything following the reverse procedure.

Posted on 25 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Starter Motor on a Renault Megane
How to Replace the Starter Motor on a Renault Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) Today we will go through the instructions that will allow us to remove and replace the starter motor on a Renault Megane. First, let's open the bonne…
How to Replace the Starter Motor on a Renault Megane 1.9 dCi
How to Replace the Starter Motor on a Renault Megane 1.9 dCi
Renault Megane (1995-2003 / Megane 1) This brief and simple guide will show you how to remove and replace the starter motor on a Renault Megane 1.9 dCi. First, open the bonnet and disconn…
Removing the Starter Motor from a Renault Megane 1.9 dCi
Removing the Starter Motor from a Renault Megane 1.9 dCi
Renault Megane (2002-2010 / Megane 2) Here are the main steps to remove and replace the starter motor on a Renault Megane 1.9 dCi. First, open the bonnet of your car and disconnect the ba…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos