Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter in a Mitsubishi Canter truck?

Model: Mitsubishi Canter MK 8 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Air filter

See other generations:
Video tutorial

In this tutorial, we will see how to replace the air filter in the Mitsubishi Canter truck, a very simple and quick operation. First, let's go to the right side of the vehicle, then locate the airbox, which is located just behind the front wheel.

Next, we detach the two metal clips located on the side edge of the box, open the cover, and unlock the plastic lever by pushing it towards the inside of the vehicle. At this point, all that is left to do is remove the old filter, clean the housing of any dirt residue, insert the replacement, and reassemble everything by following the reverse procedure.


Posted on 3 December 2025 by ScegliAuto


Related tutorials

How to Reset the Engine Oil Light on a Mitsubishi Canter Truck?
How to Reset the Engine Oil Light on a Mitsubishi Canter Truck?
Mitsubishi Canter (2010-2024 / MK 8) In this tutorial, you will learn how to reset the engine oil light on a Mitsubishi Fuso truck, a very simple and quick operation. Before doing this, …
How to replace the alternator of the Mitsubishi Canter 3.0D
How to replace the alternator of the Mitsubishi Canter 3.0D
Mitsubishi Canter (2010-2024 / MK 8) Following the instructions in this guide, we will see how to disassemble and replace the alternator of the Mitsubishi Canter 3.0D. First, open the ho…
How to Replace the Timing Chain on the Mitsubishi Canter?
How to Replace the Timing Chain on the Mitsubishi Canter?
Mitsubishi Canter (2010-2024 / MK 8) To replace the timing chain on the Mitsubishi Canter, loosen the screws securing the side cover panel of the engine block on the right side: once acc…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos