Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Mitsubishi Pajero Service Light

Model: Mitsubishi Pajero MK 4, V80 - Years 2006-2021
Part: Service warning light

Today, we will explain how to reset the service light on a Mitsubishi Pajero vehicle. To perform the reset, get into the car and insert the key into the ignition without turning on the instrument cluster or the engine. Press the button next to the odometer and hold it for about 8 seconds; when the light with the spanner symbol starts to flash, release the button and press it again. Keep the button pressed until the display shows 'reset completed'. Release the button and turn on the instrument cluster.

Posted on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the service light on the Mitsubishi Pajero
Resetting the service light on the Mitsubishi Pajero
Mitsubishi Pajero (2006-2021 / MK 4, V80) Below are the instructions to reset the service light for the routine maintenance of the engine oil change on the Mitsubishi Pajero. First, get into …
How to Remove the Steering Wheel Airbag from a Mitsubishi Pajero
How to Remove the Steering Wheel Airbag from a Mitsubishi Pajero
Mitsubishi Pajero (1999-2006 / MK 3, V60) Before you can begin, sit in the driver's seat of your Mitsubishi Pajero. Using a Torx T30 screwdriver, start by unscrewing and removing the screws t…
How to reset the service light on the Mitsubishi Pajero
How to reset the service light on the Mitsubishi Pajero
Mitsubishi Pajero (2006-2021 / MK 4, V80) Today we will see how to deactivate the maintenance light, with the symbol of the wrench, of the Mitsubishi Pajero car. To deactivate or reset the li…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos