Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Mitsubishi Pajero key remote control

Model: Mitsubishi Pajero MK 4, V80 - Years 2006-2021
Part: Key

Today we will discover the process of how to disassemble and replace the battery of the key remote for the Mitsubishi Pajero. First, take the remote in your hand and start by removing the physical key from inside it; then, use the side slot to open the remote in two parts, thus accessing the electronic board and the battery, as shown in the video. At this point, remove and replace the battery with a new one, of the correct type (in this case a CR 2032 3V); insert it in the correct direction and finally reassemble the key on the remote.

Posted on 23 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Remote Battery on a Mitsubishi Pajero
Replacing the Remote Battery on a Mitsubishi Pajero
Mitsubishi Pajero (2006-2021 / MK 4, V80) Using a small flathead screwdriver, pry in the gap and remove the remote cover. Remove the two small covers, noting how they were inserted, then lift…
How to Replace the Key Battery of the Mitsubishi Pajero 4
How to Replace the Key Battery of the Mitsubishi Pajero 4
Mitsubishi Pajero (2006-2021 / MK 4, V80) To correctly replace the battery located inside the key of your Mitsubishi Pajero fourth series (2014-2021), follow the steps described in this guide…
How to replace the battery in the Mitsubishi Pajero?
How to replace the battery in the Mitsubishi Pajero?
Mitsubishi Pajero (2006-2021 / MK 4, V80) In this tutorial, we will see how to replace the battery in a Mitsubishi Pajero, a very simple and quick operation. First of all, let's make sure tha…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos