|
Do it yourself
| |||
| ||||
Mitsubishi Outlander: How to Reset the Service Light from the Instrument Panel
Model: Mitsubishi Outlander
MK 2
- Years:
2007, 2008, 2009, 2010, 2011, 2012
Video tutorial
On the Mitsubishi Outlander, turn on the ignition without starting the engine, keeping the needles at zero. To the right of the steering wheel, below the air vent, locate the small control group with two buttons: in the video, the upper button, the one above the ESP deactivation control, is used. Press it to bring up the maintenance screen on the central display: the spanner icon appears with the distance and time remaining until the next service, expressed in km and "mon" (months). To proceed with the reset, hold down the same button until the display shows "CLR". Without releasing, continue to hold it until the text disappears and the screen returns to show the new service interval values. At this point, the maintenance light on the Mitsubishi Outlander is reset, and the counter has been correctly reconfigured.
Posted on 16 May 2026 by ScegliAuto
Related tutorials
Mitsubishi Outlander
(2013-2021 /
MK 3)
The service light on the Mitsubishi Outlander MK3 (produced between 2013 and 2020) can be reset very easily using a single button. Once the ignition …
Mitsubishi Outlander
(2007-2012 /
MK 2)
In this video, we see how to reset the service light on a Mitsubishi Outlander (but the same procedure also applies to the Lancer) MK2: with the inst…
Mitsubishi Outlander
(2013-2021 /
MK 3)
The service light that is shown on the instrument panel of the Mitsubishi Outlander can be reset by turning on the instrument panel, inserting the ap…
Other guides you may be interested in
|
How to Reset the Tire Pressure Light on a MG ZS?
On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.028
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
