Do it yourself
| ||||
|
Mitsubishi Outlander - Video tutorial
Model: Mitsubishi Outlander
MK 2
- Years 2007-2012 Differential oil replacement on a Mitsubishi Outlander? Let's see how it replaces. We lift the car with a lifting jack. To change the oil of the differential we must unscrew the pin placed under it with a socket wrench as in the video. Once the pin has been unscrewed, let the liquid flow into a container for disposal. At the end of the drainage, screw the pin under the differential cup, then top up with the suitable liquid (unscrew the pin on the side of the oil sump). We bring the car to the ground after the replacement. We test the correct functioning of the differential.
Posted on 15 December 2023 by ScegliAuto
Other guides that may interest you |
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |