Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Dashboard Lights on Mitsubishi Lancer

Model: Mitsubishi Lancer MK 7 - Years: 1995, 1996, 1997, 1998, 1999, 2000
Part: Instrument panel light

See other generations:
Video tutorial

Start by unscrewing the two screws located at the upper corners that secure the instrument cluster/speedometer. Release the outermost trim around the speedometer and remove it. At this point, you will see four screws, two at the top and two at the bottom, securing the cluster: unscrew them.

Remove the cluster and position it to work on the back. There are four small bulbs, and replacing them is very simple: just rotate them slightly from behind and pull them out of the housing.

Insert the new ones and rotate them to ensure they are securely fixed, then reassemble everything.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

Where to Find the OBD Port of the 2008 Mitsubishi Lancer
Where to Find the OBD Port of the 2008 Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) If you want to access the OBD port of your 2008 Mitsubishi Lancer, simply read this guide and follow the steps described. First, enter the car from t…
How to Reset the Service Light on a Mitsubishi Lancer?
How to Reset the Service Light on a Mitsubishi Lancer?
Mitsubishi Lancer (2007-2020 / MK 9) To reset the Service light on a Mitsubishi Lancer, turn on the ignition by rotating the key in the ignition switch. Once the dashboard lights up, pre…
Replacement of the rear light and its bulbs for the Mitsubishi Lancer.
Replacement of the rear light and its bulbs for the Mitsubishi Lancer.
Mitsubishi Lancer (2000-2006 / MK 8) Today we will go through the steps that will allow us to disassemble and replace the rear light and its bulbs on the Mitsubishi Lancer. First, let's …

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos