Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. L 200
    4. : Instructions for replacing the timing belt on the Mitsubishi L 200 MK1

Mitsubishi L 200 - Video tutorial

Model: Mitsubishi L 200 MK 1 - Years 1996-2005
Part: Timing belt
Operation: Instructions for replacing the timing belt on the Mitsubishi L 200 MK1

In this guide we will see the main steps to remove and replace the timing belt on the Mitsubishi L 200 first series. We open the engine hood and begin to disassemble our intercooler, unscrewing the upper screws and disconnecting the various wiring, including the coolant pipes; after which we also go to disassemble the cooling radiator, removing the screws of the brackets and the sleeves. At this point we remove the fan and the service belt; then we disassemble the timing cover, carrying out the belt replacement procedure, following the video to the end!


Posted on 14 March 2024 by ScegliAuto

    Frequently Asked Questions

    • L 200 2015-2024 - When to replace the Mitsubishi L 200 timing belt? Read Answer
    • L 200 2015-2024 - How much does it cost to replace the timing belt on a Mitsubishi L200? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos