Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. L 200
    4. : Mitsubishi L200 timing belt replacement guide

Mitsubishi L 200 - Video tutorial

Model: Mitsubishi L 200 MK 2 - Years 2005-2015
Part: Timing belt
Operation: Mitsubishi L200 timing belt replacement guide

We see in this guide the main instructions to be able to replace the timing belt of the Mitsubishi L200, with engine code 4G64. First of all, we are going to remove the cooling system belt, then unscrewing the screws of the timing cover; after which we remove the crankshaft pulley, as shown in the video. At this point we take the references necessary to replace the timing belt; we loosen the tensioner and remove the belt from the various toothed pulleys. We insert the new belt and reassemble everything!


Posted on 5 May 2024 by ScegliAuto

    Frequently Asked Questions

    • L 200 2015-2024 - When to replace the Mitsubishi L 200 timing belt? Read Answer
    • L 200 2015-2024 - How much does it cost to replace the timing belt on a Mitsubishi L200? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos