Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light Bulbs on the Mitsubishi Pajero 4 Sport

Model: Mitsubishi Pajero V80, MK 4 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light bulb

See other generations:
Video tutorial

In today's video, we will see how to disassemble and replace the rear light bulbs on the fourth series Mitsubishi Pajero, Sport version. First, open the tailgate and start unscrewing the side screws of the light unit to detach it; then disconnect the various electrical connectors of the bulbs, along with the bulb holders, to remove and replace them with new ones, as shown in the video.

At this point, disassemble the other light unit to perform the same replacement; it is also shown how to replace the third brake light!


Updated on 26 May 2026 by ScegliAuto


Related tutorials

Where are the fog light fuses located in the Mitsubishi Pajero Sport?
Where are the fog light fuses located in the Mitsubishi Pajero Sport?
Mitsubishi Pajero (2006-2021 / V80, MK 4) If the fog lights on your Mitsubishi Pajero Sport suddenly stop working and the bulbs are in good condition, check the status of the respective fuses…
How to Change the Rear Light Bulbs on a Mitsubishi Pajero
How to Change the Rear Light Bulbs on a Mitsubishi Pajero
Mitsubishi Pajero (1999-2006 / V60, MK 3) Want to change the rear light bulbs on a Mitsubishi Pajero but don't know how? No problem, follow these steps: open the rear tailgate, unscrew the se…
Fuse Box Diagram for a Mitsubishi Pajero Sport
Fuse Box Diagram for a Mitsubishi Pajero Sport
Mitsubishi Pajero (2006-2021 / V80, MK 4) This brief video guide shows the diagrams for the two fuse boxes located inside a Mitsubishi Pajero Sport, model produced from 2015 to 2019. These di…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos