Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on the Mitsubishi Outlander

Model: Mitsubishi Outlander MK 3 - Years 2013-2021
Part: Battery

If you need to replace the battery on this vehicle, the description below provides the instructions and operational methods to carry out the task safely, and you can also refer to the images in the video. Once you open the bonnet, locate the battery on the left side. First, remove the clips securing the air intake duct, and underneath it, you will find the battery. Proceed to disconnect the negative terminal and then the positive terminal, and using a spanner, unscrew the nuts securing the upper support plate. Remove the battery and replace it with the new one, then reconnect the positive terminal first and then the negative terminal, reattach the securing bracket, and finally refit the air intake duct.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Key Remote Battery of a Mitsubishi Outlander
How to Change the Key Remote Battery of a Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) Replacing the battery of the key remote for a Mitsubishi Outlander is a very simple and quick task. You will only need a small flathead screwdriver a…
Replacing the Battery of the Mitsubishi Outlander
Replacing the Battery of the Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) The steps outlined in this guide will show you how to remove and replace the battery of the Mitsubishi Outlander. First, open the bonnet of the vehic…
How to replace the key fob battery of the Mitsubishi Outlander
How to replace the key fob battery of the Mitsubishi Outlander
Mitsubishi Outlander (2007-2012 / MK 2) In this short and simple guide, we will see the instructions needed to disassemble and replace the battery of the key fob for the Mitsubishi Outlande…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos