Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Car Alternator

Model: Mitsubishi Pajero MK 2, V20 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999
Part: Alternator

See other generations:
Video tutorial

The car alternator is a fundamental component of the electrical system. When it is not functioning properly, the car may fail to start.

In any case, you can replace it without necessarily going to a mechanic. With the engine cold, start by disconnecting the battery at both terminals and locate the position of the alternator, removing the belt that supports it with the appropriate spanner.

To remove it completely, you must also take out the screws that hold it, along with the wires, remembering their positions to reconnect them with the new alternator.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Where is the fuse box located on the Mitsubishi Pajero?
Where is the fuse box located on the Mitsubishi Pajero?
Mitsubishi Pajero (1991-1999 / MK 2, V20) The Mitsubishi Pajero II, produced from 1991 to 1999, has two fuse boxes: - The first fuse box is located in the engine compartment, near the battery…
Where Are the Fuses Located in the Mitsubishi Pajero?
Where Are the Fuses Located in the Mitsubishi Pajero?
Mitsubishi Pajero (2006-2021 / V80, MK 4) The fuses in the Mitsubishi Pajero are housed within dedicated fuse boxes located on the vehicle. In this type of vehicle, you will find two fuse box…
How to Remove the Front Bumper of the Mitsubishi Pajero
How to Remove the Front Bumper of the Mitsubishi Pajero
Mitsubishi Pajero (1991-1999 / MK 2, V20) If you intend to remove the front bumper for replacement on this car model, the following description contains all the necessary instructions to carr…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos