Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mitsubishi
  4. :
  5. Outlander
  6. : How to replace the external rear handle in the Mitsubishi Outlander?

Mitsubishi Outlander - Video tutorial

Model: Mitsubishi Outlander MK 2 - Years 2007-2012
Part: Handle
Operation: How to replace the external rear handle in the Mitsubishi Outlander?

In this tutorial we can see how to replace the external rear handle in the Mitsubishi Outlander, very simple operation. First of all we open the door in question, then remove the adhesive cover indicated and, with a Torx T30 wrench, unscrew the bolt placed inside the hole, taking care not to let it fall into the door. If this happens, we follow the instructions to disassemble the interior panel. At this point we can extract the lock block, remove the handle by pushing it towards the rear of the vehicle and mount the spare following the reverse procedure.


Posted on 20 October 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos