Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp of the Mitsubishi i-MiEV

Model: Mitsubishi I Miev MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Headlight

Video tutorial

To remove the front headlamp of the Mitsubishi i-MiEV, open the bonnet to access the screws securing the headlamp in its housing. Disconnect the plastic cover located at the top of the headlamp, under which you will find the screw that secures it from above.

Once this screw is removed, slightly move the front bumper on the side corresponding to the headlamp to unscrew the screw beneath it. This will allow you to extract the headlamp from its seat by disconnecting the connector.


Updated on 30 June 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel on a Mitsubishi I Miev
How to Remove the Door Panel on a Mitsubishi I Miev
Mitsubishi I Miev (2009-2021 / MK 1) .. removing the front door panel of a Mitsubishi I Miev. First, open the front door of the vehicle and start unscrewing all the fastening screws located.. …
Fuse Box Diagram and Location for the Mitsubishi I Miev
Fuse Box Diagram and Location for the Mitsubishi I Miev
Mitsubishi I Miev (2009-2021 / MK 1) .. positioning of the fuses for the Mitsubishi I Miev by following the instructions below. First, open the front bonnet of your car and locate the external.. …
What is the Fuse Diagram for the Mitsubishi i-MiEV?
What is the Fuse Diagram for the Mitsubishi i-MiEV?
Mitsubishi I Miev (2009-2021 / MK 1) .. see where the fuse boxes for the Mitsubishi i-MiEV are located and their respective diagrams, useful in case we need to check the fuses for a malfunctioning.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos