Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Pajero
    4. : How to remove the Mitsubishi Pajero door panel

Mitsubishi Pajero - Video tutorial

Model: Mitsubishi Pajero V80, MK 4 - Years 2006-2021
Part: Door panel
Operation: How to remove the Mitsubishi Pajero door panel

Let's see the instructions necessary to disassemble and replace the front door panel of the Mitsubishi Pajero. First we open the front door of our car and use a thin pry to remove the grab handle cover; in the same way remove the window winder button, disconnecting the electrical connector that we find underneath, as shown in the video. At this point we unscrew the fixing screws of the panel that we find on the sides, in order to detach and remove it; finally disconnect the handle cable, replacing and then reassembling the panel!


Posted on 5 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos