Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the "Service" Light on a Mitsubishi Outlander?

Model: Mitsubishi Outlander MK 4 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

To reset the "Service" light on a Mitsubishi Outlander, start by pressing and holding the reset button located under the left side of the instrument cluster. While continuing to hold the reset button, turn on the instrument cluster without starting the engine.

Keep holding the reset button until the "Service" light begins to flash and then turns off. Once the light goes off, release the reset button. Turn off the instrument cluster and then turn it back on to check that the "Service" light has been successfully reset.

If done correctly, the light should no longer illuminate.


Updated on 2 October 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Mitsubishi Outlander?
How to Reset the Service Light on the Mitsubishi Outlander?
Mitsubishi Outlander (2013-2021 / MK 3) To reset the service light on the Mitsubishi Outlander, turn on the ignition by inserting the key into the ignition switch. Once the dashboard lights…
How to Reset the Service Light on the 2020 Mitsubishi Outlander?
How to Reset the Service Light on the 2020 Mitsubishi Outlander?
Mitsubishi Outlander (2013-2021 / MK 3) The service light on the Mitsubishi Outlander MK3 (produced between 2013 and 2020) can be reset very easily using a single button. Once the ignition …
How to reset the service light on the 2017 Mitsubishi Outlander
How to reset the service light on the 2017 Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) If you want to correctly complete the manual reset of the service light on your 2017 Mitsubishi Outlander, you must read the following steps and appl…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos