Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster from the Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Instrument cluster

See other generations:
Video tutorial

This guide will explain step by step how to correctly remove the entire instrument cluster from your first-generation Nissan Juke. First, obtain a cross-head screwdriver, then enter the car and ensure it is turned off. Now, turn the steering wheel fully to the left and with the screwdriver, unscrew the small screw located on the side of the dashboard.

Do the same on the right side and then remove the entire dashboard plastic.

After that, unscrew the screws holding the instrument cluster in place and pull it towards you. Finally, disconnect the electrical cable present and you are done.


Updated on 21 October 2026 by ScegliAuto


Related tutorials

Reset Service Light on Nissan Juke
Reset Service Light on Nissan Juke
Nissan Juke (2010-2019 / MK 1) Do you want to reset the maintenance light on a Nissan Juke? Here’s how to proceed with the reset of the Nissan Juke car light. Turn on the instrumen…
How to Reset the Service Light on a Nissan Juke
How to Reset the Service Light on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) To reset the Service light on a Nissan Juke, turn the ignition on by rotating the key. Once the dashboard is lit, press and hold the left button loca…
Disassembly of the interior rearview mirror of the Nissan Juke
Disassembly of the interior rearview mirror of the Nissan Juke
Nissan Juke (2010-2019 / MK 1) Below are the necessary information on how to disassemble and replace the interior rearview mirror of the Nissan Juke, in simple steps. First, we get…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos