Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the fog light from the bumper of a Nissan Juke MK1

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Fog lights

In this video, we see how to remove the bumper of a Nissan Juke MK1 to replace the fog light housing. Removing the wheel is not necessary, but it simplifies things a lot. If we only need to replace the bulb, we can skip most of the steps shown in the video, because the bulb can be removed from the back while the housing is still attached to the bumper. Otherwise, after removing the wheel, we will also need to remove the inner fender, removing three clips and two bolts; then we must detach the bottom part of the bumper in order to access the internal housing of the fog light, which is held in place by another 10mm bolt.

Posted on 14 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Nissan Juke
How to replace the front headlight bulb of the Nissan Juke
Nissan Juke (2019-2026 / MK 2) Today we will explain how to replace the headlight bulb on the right front headlight of the Nissan Juke. When you want to replace the headlight bulb,…
How to Remove the Front Bumper of the Nissan Juke?
How to Remove the Front Bumper of the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) To remove the front bumper of the Nissan Juke, you need to detach the outer covers of the wheel arches, allowing access to all the screws underneath:…
How to Replace the Front Headlamp Bulbs on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) Learn how to replace the front headlamp bulbs on a Nissan Juke: open the bonnet by pulling the lever located at the bottom right of the dashboard and…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos