Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the wiper blades of the Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Windshield wipers

See other generations:
Video tutorial

The following tutorial aims to explain how to replace the windshield wiper blades of the Nissan Juke model 1 on your own. The first step is to turn on the car's ignition and press the lever to activate the windshield wipers and position them vertically.

The second step is to lift the clips of the blades to remove them.

The third step is to insert the new blades and lower the clips. Return the windshield wipers to a horizontal position and proceed with the replacement of the rear windshield wiper, following the same steps.

The replacement of the blades should be done at least once a year on all three windshield wipers.


Posted on 12 February 2025 by ScegliAuto


Related tutorials

How to Replace the Diesel Filter in the Nissan Juke
How to Replace the Diesel Filter in the Nissan Juke
Nissan Juke (2010-2019 / MK 1) In today's video, you will see how to independently replace the diesel filter in the Nissan Juke 1.5 dCi. First, allow the vehicle to cool down, then…
How to replace the fuel filter in the Nissan Juke?
How to replace the fuel filter in the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) In this tutorial, see how to replace the fuel filter in the Nissan Juke, a simple operation but one that requires disassembling many components. Firs…
Reset Service Light on Nissan Juke
Reset Service Light on Nissan Juke
Nissan Juke (2010-2019 / MK 1) Do you want to reset the maintenance light on a Nissan Juke? Here’s how to proceed with the reset of the Nissan Juke car light. Turn on the instrumen…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos